A #6 JIC fitting has a 9/16-18 thread size and is commonly used in hydraulic systems. The "6" refers to the fitting's dash size, which corresponds to the nominal size of 6/16 inches or 3/8 inches for the tube's outer diameter. See full answer »

JIC (Joint Industry Council) and NPT (National Pipe Taper) are two different types of fittings used in fluid systems. JIC fittings have a 37-degree flare seating surface and are typically used for high-pressure applications, providing a metal-to-metal seal. NPT fittings have a tapered thread that seals by wedging the threads together, often requiring a sealant like Teflon tape, and are commonly used in low to medium pressure applications. See full answer »

JIC (Joint Industry Council) and NPT (National Pipe Thread) fittings are not directly compatible because they have different thread types and sealing mechanisms. JIC fittings use a 37-degree flare for sealing, while NPT fittings rely on tapered threads that require thread sealant. Adapter fittings are available to connect the two types if needed. See full answer »

JIC stands for "Joint Industry Council," and it refers to a type of thread standard commonly used in hydraulic fittings. JIC threads have a 37-degree flare seating surface, which provides a metal-to-metal seal for high-pressure applications. This standard is widely used due to its reliability and compatibility with various hydraulic systems. See full answer »

To determine the size of a JIC fitting, first measure the outside diameter of the male thread or the inside diameter of the female thread using a caliper. Then, compare this measurement to a JIC size chart, which will indicate the corresponding fitting size based on the thread diameter. This process ensures accurate identification of the fitting size for proper compatibility and installation. See full answer »

JIC fittings are sized based on the outer diameter of the tubing they are intended to connect, typically measured in inches. The sizing is denoted by a dash number, which represents the tube size in sixteenths of an inch. For example, a -04 JIC fitting is designed for tubing with an outer diameter of 1/4 inch. See full answer »

JIC 12 refers to a specific size in the Joint Industry Council (JIC) hydraulic fitting system, which is commonly used in North America. The JIC 12 fitting has a 3/4-inch tube outer diameter and typically corresponds to a 1-1/16 inch thread size. These fittings are characterized by their 37-degree flare seating surface. See full answer »

A 3/4 JIC fitting refers to a type of hydraulic fitting that uses a 37-degree flare seating surface. The "3/4" denotes the nominal size of the fitting, corresponding to the outer diameter of the tubing it is designed to connect, which is typically 3/4 inch. JIC fittings are commonly used in high-pressure applications and are known for their reliable, leak-proof connections. See full answer »

JIC in the context of piping stands for Joint Industry Council. It refers to a type of fitting that is commonly used in hydraulic systems. These fittings have a 37-degree flare seating surface and are known for their reliability and ability to withstand high pressures. See full answer »