My Cart: 0 item(s)
Thumbnail Filmstrip of 304C-04 | 1/4" JIC Solid Cap Images
See Product Specs Below.
Questions & Answers
Popular Questions
To identify JIC fittings, first measure the outer diameter of the male thread or the inner diameter of the female thread using a caliper. Then, compare these measurements to a JIC thread size chart to determine the correct size, ensuring the fitting has a 37-degree flare angle, characteristic of JIC fittings.
To identify JIC (Joint Industry Council) hydraulic fittings, look for a 37-degree flare seating surface on the male fitting and a corresponding 37-degree flare on the female fitting. Additionally, JIC fittings typically follow SAE J514 standards, and you can verify the thread size and pitch using a thread gauge or caliper to ensure compatibility.
NPT (National Pipe Thread) and JIC (Joint Industry Council) are both types of fittings used in fluid transfer systems, but they differ in design and application. NPT fittings have a tapered thread that creates a seal through the wedging action of the threads, while JIC fittings use a 37-degree flare seating surface to create a metal-to-metal seal, providing a more reliable, reusable connection.
The primary difference between a 1/4-inch and a 3/8-inch air hose is the inner diameter, which affects air flow capacity. A 3/8-inch hose typically allows for a greater volume of air to pass through, making it suitable for tools requiring higher air consumption. In contrast, a 1/4-inch hose is lighter and more flexible, often sufficient for tasks requiring lower air flow.
The cubic feet per minute (CFM) that a 1/4 inch air hose can handle depends on several factors, including the pressure of the air system and the length of the hose. Generally, a 1/4 inch air hose can handle around 10-20 CFM at 90 PSI for short distances. However, as the hose length increases, the CFM capacity may decrease due to pressure drop.
To cap an airline, first, ensure that the air supply is turned off and the line is depressurized. Then, select an appropriate cap that matches the size and type of the airline fitting, such as a push-to-connect cap or a threaded cap. Securely attach the cap to the end of the airline to prevent any air leakage.
A #4 JIC fitting refers to a specific size in the Joint Industry Council (JIC) fitting standard, which is commonly used for hydraulic systems. The #4 size corresponds to a 7/16-20 UNF (Unified National Fine) thread, and it is designed to fit a tube with an outer diameter of 1/4 inch. JIC fittings are known for their 37-degree flare seating surface, providing a reliable, leak-proof connection.
Yes, a bigger air hose can affect pressure. A larger diameter hose reduces resistance to airflow, which can result in a lower pressure drop over the length of the hose. This means that the pressure at the end of a bigger hose can be closer to the source pressure compared to a smaller hose, assuming other factors like hose length and material remain constant.
