To identify JIC fittings, first measure the outer diameter of the male thread or the inner diameter of the female thread using a caliper. Then, compare these measurements to a JIC thread size chart to determine the correct size, ensuring the fitting has a 37-degree flare angle, characteristic of JIC fittings. See full answer »

Certainly! "JIC" stands for Joint Industry council. See full answer »

To distinguish between JIC (Joint Industry Council) and SAE (Society of Automotive Engineers) fittings, examine the flare angle and thread type. JIC fittings typically have a 37-degree flare angle, whereas SAE fittings often feature a 45-degree flare angle. Additionally, ensure to check thread compatibility, as both standards may use different thread types despite sometimes having similar dimensions. See full answer »

A hose fitting designed with a JIC (Joint Industry Council) flare fitting is used to create a secure, leak-resistant connection between hydraulic hoses and components. The 37-degree flare of the JIC fitting provides a tight seal in high-pressure hydraulic systems, ensuring efficient fluid transfer and preventing leaks. These fittings are commonly used in various industrial and mobile equipment applications. See full answer »

JIC (Joint Industry Council) and NPT (National Pipe Tapered) are both types of thread standards used in fluid connections, but they have distinct differences. JIC fittings use a 37-degree flare seating surface to create a seal and are primarily used in hydraulic systems. In contrast, NPT threads are tapered and rely on the threads themselves to create a seal, making them common in plumbing and piping systems where a leak-proof seal is necessary. See full answer »

AN (Army-Navy) and JIC (Joint Industry Council) fittings are similar in appearance and both have a 37-degree flare, but they are not fully interchangeable. AN fittings are designed to strict military specifications, while JIC fittings are manufactured to industrial standards, which can result in differences in tolerance, material, and finish. Although they might fit together, using them interchangeably can lead to issues in high-pressure or critical applications. See full answer »

A JIC (Joint Industry Council) fitting seals through a metal-to-metal contact between its flared end and the cone-shaped seating surface of the fitting it connects to. The 37-degree flare on the fitting creates a tight seal when compressed against the matching seat, ensuring a leak-proof connection without the need for additional sealing materials like O-rings or gaskets. This design is effective for high-pressure applications, as the seal is maintained by the precision and strength of the metal surfaces. See full answer »

318-08 is the nut used for 1/2'' O.D. steel tubing. See full answer »