DiscountHydraulicHose

0

DiscountHydraulicHose

Shop Categories

Secure Checkout

Thumbnail Filmstrip of 3384-12 | 3/4" Black PUSH-LOCK (by the foot) Images

    3384-12 | 3/4" Black PUSH-LOCK (by the foot)
    graphics/00000001/3384-04-1.jpg
    36820 3384-12
    Purchase 3384-12 | 3/4" Black PUSH-LOCK (by the foot)

    SKU: 3384-12
    3384-12 | 3/4" Black PUSH-LOCK (by the foot)

    Maximum Working Pressure: 250 PSI

    5.35

    $5.35 / per foot

    Please enter the number of feet you'd like as the quantity below, and we will cut and ship you a complete piece at that length.

    Please enter feet or less in the quantity box below.

    − +
     

    Tell A Friend

    Processing...
    Your message has been sent. Thank you for sharing!
    An error has occurred. Please try your request again.

    Prop-65-WarningWARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov


    3384-12 | 3/4" Black PUSH-LOCK hose, available by the foot, has a 3/4 inch diameter, making it perfect for various applications. Its  PUSH-LOCK design ensures a quick, hassle-free and leak-free connection. 3/4" 3384 Black Push-Lock Hose is recommended for low pressure air, oil, fuel and water lines. No clamps or ferrules needed when used with Push-Lock Hose Barbs Maximum working pressure: 250 psi


    Use this product with the following hose fittings:

    Push-Lock Barbs


    Product
    Number     		Inside
    Diameter     		Outside
    Diameter     		Maximum
    Working Pressure         		Minimum
    Burst Pressure         		Minimum
    Bend Radius
    3384-04 1/4" 0.50" 250 psi 1,000 psi 3"
    3384-06 3/8" 0.62" 250 psi 1,000 psi 3"
    3384-08 1/2" 0.75" 250 psi 1,000 psi 5"
    3384-10 5/8" 0.91" 250 psi 1,000 psi 6"
    3384-12 3/4" 1.03" 250 psi 1,000 psi 7"

    Inner tube: Oil-Resistant Nittrile (BTR) tube
    Reinforcement: Braided textile reinforcement
    Outer cover: Oil and abrasion resistant Neoprene (CR)
    Temp. range: -40°F to +212°F
    Water not to exceed 150°F
    Air not to exceed 160°F
    This hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives. Not suitable for hydraulic fluids on phosphate ester basis (HFD).