My Cart: 0 item(s)
Thumbnail Filmstrip of 4100-S2-12C | Dust Cap for 3/4" Male Nipple Images
|
|
|
|
|
1/4"
|
3,000 | 4 |
| 3/8" | 3,000 | 7 |
| 1/2" | 3,000 | 7 |
| 5/8" | 3,000 | 18 |
| 3/4" | 3,000 | 18 |
| 1" | 3,000 | 40 |
| 1-1/4" | 2,750* | 75 |
| 1-1/2" | 2,500** | 100 |
*Nipple holds max. 2,500 PSI when disconnected
** Nipple holds max. 2,000 PSI when disconnected
Questions & Answers
Popular Questions
When installing O-rings, a suitable lubricant should be used to reduce friction and prevent damage. A tool called an O-ring installation tool can also be used to ensure proper placement and avoid twisting or pinching the O-ring. This information is found on the Global O-Ring and Seal website (https://www.globaloring.com/o-ring-in...) under the sections "Lubrication" and "Tools." Moreover, the surface where the O-ring will be installed must be clean and free from sharp edges, burrs, or spiral machined finishes to prevent damage. This information is found on the Parker Hannifin O-Ring Handbook (https://www.parker.com/literature/O-R...) on page 6-3 under the section "Surface Finish and Hardness."
Customers Also Bought
| Body Size | Maximum Working Pressure (psi) | Maximum Flow Rate (gpm) |
|---|---|---|
| 1/4" | 3,000 | 4 |
| 3/8" | 3,000 | 7 |
| 1/2" | 3,000 | 7 |
| 5/8" | 3,000 | 18 |
| 3/4" | 3,000 | 18 |
| 1" | 3,000 | 40 |
| 1-1/4" | 2,750* | 75 |
| 1-1/2" | 2,500** | 100 |
* Nipple holds max. 2,500 psi when disconnected ** Nipple holds max. 2,000 psi when disconnected
