Secure Checkout

Thumbnail Filmstrip of 4SH-32 | 2" EN 856 4SH Hydraulic Hose (by the foot) Images

    4SH-32 | 2" EN 856 4SH Hydraulic Hose (by the foot)
    graphics/00000001/4SH-12-1.jpg
    Purchase 4SH-32 | 2" EN 856 4SH Hydraulic Hose (by the foot)

    PART #: 4SH-32
    4SH-32 | 2" EN 856 4SH Hydraulic Hose (by the foot)

    Product Reviews

    $44.64






    Volume Discounts

    Quantity Price
    1 - 99 $44.64
    100 + $41.96
    doctype html> Untitled Document

    Four-wire spiral hose. Ideally suited for high-impulse applications. Handles higher pressures than SAE 100R12. No skiving required with W-Series hose fittings (up to size -24 only). Recommended for petroleum and water-based hydraulic fluids in very high pressure applications.

    4SH Hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.

    Not suitable for hydraulic fluids on phosphate ester basis (HFD).

     

    Use this hose with:


    W Series
    Bite-To-The-Wire
    Crimp Fittings

    Up to size -24 only

    JJ Series
    Skive
    Crimp Fittings
    Sizes -20, -24 and -32 only

     

     



    Hose
    Number
    Outside
    Diameter
    Maximum Working
    Pressure (MWP)
    Minimum
    Burst Pressure
    Minimum
    Bend Radius
    4SH-12 3/4" 1.21" 6,095 24,380 9.5"
    4SH-16 1" 1.50" 5,515 22,060 12"
    4SH-20 1-1/4" 1.85" 5,000 20,000 16.5"
    4SH-24 1-1/2" 2.11" 4,200 16,800 20"
    4SH-32 2" 2.63" 3,625 14,500 25"


    Hose Features
    Inner   Tube Material Oil-resistant Synthetic Rubber
    Reinforcement 4-Wire braid of high tensile steel wire.
    Cover Protection Oil and Abrasion-Resistant synthetic rubber
    Temperature Rating -40°F to 212°F