A #6 hydraulic fitting refers to a fitting with a 3/8-inch nominal size, as the "#6" corresponds to the six-sixteenths of an inch (3/8") in hydraulic system terminology. The actual dimensions of the fitting may vary depending on the specific type and standard (e.g., JIC, ORFS), but the nominal size remains consistent. See full answer »

To determine your JIC fitting size, measure the outside diameter (OD) of the male thread or the inside diameter (ID) of the female thread using calipers. Then, compare your measurement to a JIC fitting size chart to identify the corresponding size. See full answer »

To identify JIC fittings, first measure the outer diameter of the male thread or the inner diameter of the female thread using a caliper. Then, compare these measurements to a JIC thread size chart to determine the correct size, ensuring the fitting has a 37-degree flare angle, characteristic of JIC fittings. See full answer »

A #6 JIC fitting has a 9/16-18 thread size and is commonly used in hydraulic systems. The "6" refers to the fitting's dash size, which corresponds to the nominal size of 6/16 inches or 3/8 inches for the tube's outer diameter. See full answer »

Certainly! "JIC" stands for Joint Industry council. See full answer »

JIC (Joint Industry Council) fittings are characterized by their 37-degree flared sealing surface, which ensures a metal-to-metal seal, primarily used in high-pressure hydraulic applications. ORB (O-Ring Boss) fittings, on the other hand, utilize an O-ring in a straight-thread design to create a leak-tight seal, making them ideal for applications requiring a robust, reliable seal against fluid leakage. See full answer »

This is a hydraulic adapter that connects a #6 JIC male fitting to an ORB male fitting. Hydraulic adapters like this are essential for connecting different types of fittings in hydraulic systems, ensuring a secure and leak-free connection. See full answer »

The #6 jic fitting has a 37-degree flare. This angle helps create a tight seal with the corresponding female fitting, preventing leaks in high-pressure hydraulic systems. See full answer »

To determine the size of a hydraulic fitting, measure the outer diameter of the threads using a caliper and count the number of threads per inch to identify the thread size and pitch. Additionally, refer to a thread identification chart that corresponds to the fitting standard (e.g., NPT, BSP, JIC) to confirm the size. Always ensure you have a precise measurement to avoid mismatches in hydraulic systems. See full answer »

JIC stands for Joint Industry Council. The #6 JIC fitting is known for its 37-degree flare design, which provides a strong, reliable seal with female fittings, commonly used in high-pressure hydraulic applications. See full answer »