The numbers on a hydraulic hose indicate the size of the hose. They usually refer to the inside diameter, outside diameter and the pressure rating of the hose. You can find this information on the website of discounthydraulichose the section "Hydraulic Hose", See full answer »

To identify JIC fittings, first measure the outer diameter of the male thread or the inner diameter of the female thread using a caliper. Then, compare these measurements to a JIC thread size chart to determine the correct size, ensuring the fitting has a 37-degree flare angle, characteristic of JIC fittings. See full answer »

Certainly! "JIC" stands for Joint Industry council. See full answer »

To identify JIC (Joint Industry Council) hydraulic fittings, look for a 37-degree flare seating surface on the male fitting and a corresponding 37-degree flare on the female fitting. Additionally, JIC fittings typically follow SAE J514 standards, and you can verify the thread size and pitch using a thread gauge or caliper to ensure compatibility. See full answer »

The standard for JIC (Joint Industry Council) fittings is defined by the SAE J514 specification. These fittings have a 37-degree flare seating surface, commonly used in hydraulic applications for providing a reliable, leak-proof seal. See full answer »

JIC (Joint Industry Council) fittings should be tightened to a point where they form a metal-to-metal seal without over-torquing, which could damage the fitting or cause leaks. Generally, hand-tighten the fitting, then use a wrench to further tighten it by approximately one to one and a half flats (hex sides) beyond hand-tight. Always refer to the manufacturer's specifications for precise torque values. See full answer »

To determine the size of a JIC fitting, measure the outer diameter of the male threads or the inner diameter of the female threads and refer to a JIC size chart to match the measurement to the corresponding size. JIC fittings follow a standardized sizing system, typically listed in inches or millimeters. See full answer »

A JIC (Joint Industry Council) female swivel is a type of fitting commonly used in hydraulic systems to connect tubes or hoses. It features a 37-degree flare at the connection point and allows for rotational movement, making it easier to install and adjust without twisting the hose or tube. See full answer »

If you don't see the 1/2 jic fitting you're looking for, give us a call or email us, and we will let you know if that one is already on our list. Our team is here to help you find the right fitting for your needs. See full answer »

The tube size of the 1/2 JIC female fitting is 1/2". This ensures a secure connection with 1/2" male fittings, reducing the risk of leaks in high-pressure applications. See full answer »