My Cart: 0 item(s)
Thumbnail Filmstrip of 6400-08-10 | 1/2" JIC Male x #10 SAE/ORB Male Images
See Product Specs Below.
Questions & Answers
Popular Questions
To identify JIC fittings, first measure the outer diameter of the male thread or the inner diameter of the female thread using a caliper. Then, compare these measurements to a JIC thread size chart to determine the correct size, ensuring the fitting has a 37-degree flare angle, characteristic of JIC fittings.
To determine the size of a JIC fitting, measure the outer diameter of the male threads or the inner diameter of the female threads and refer to a JIC size chart to match the measurement to the corresponding size. JIC fittings follow a standardized sizing system, typically listed in inches or millimeters.
JIC stands for "Joint Industry Council," and it refers to a type of thread standard commonly used in hydraulic fittings. JIC threads have a 37-degree flare seating surface, which provides a metal-to-metal seal for high-pressure applications. This standard is widely used due to its reliability and compatibility with various hydraulic systems.
A number 10 JIC (Joint Industry Council) fitting typically has a 7/8-inch outside diameter for the tube or hose it connects to. The JIC fitting is a type of hydraulic fitting with a 37-degree flare seating surface, which ensures a secure and leak-free connection. These fittings are commonly used in high-pressure fluid power applications.
ORB (O-Ring Boss) and JIC (Joint Industry Council) fittings are both types of hydraulic fittings but differ in their sealing methods and applications. ORB fittings use an O-ring to create a leak-proof seal, making them ideal for high-pressure applications. JIC fittings, on the other hand, have a 37-degree flare seating surface and rely on metal-to-metal contact for the seal, which allows them to be used in a wide range of applications due to their versatility and ability to handle moderate pressures.
To determine the size of a JIC fitting, first measure the outside diameter of the male thread or the inside diameter of the female thread using a caliper. Then, compare this measurement to a JIC size chart, which will indicate the corresponding fitting size based on the thread diameter. This process ensures accurate identification of the fitting size for proper compatibility and installation.
JIC (Joint Industry Council) and SAE (Society of Automotive Engineers) fittings are not exactly the same but are compatible in certain applications. Both have a 37-degree flare seating surface, which allows them to connect with each other without leaking. However, it's important to ensure that the materials and pressure ratings are compatible for the specific application.
The #10 JIC fitting refers to a specific size within the Joint Industry Council (JIC) standards for hydraulic fittings. It has a 7/8-inch outer diameter and uses a 37-degree flare seating surface to create a seal. JIC fittings are commonly used in hydraulic applications due to their reliability and ease of assembly.
