Product Search

    Secure Checkout
    HT-08-ASB | 1/2" HYDRAULAX TOUGH™ Hydraulic Hose Assembly graphics/00000001/3/INTERTRACO FLEXIT.png
      HT-08-ASB | 1/2" HYDRAULAX TOUGH™ Hydraulic Hose Assembly
      Purchase HT-08-ASB | 1/2" HYDRAULAX TOUGH™ Hydraulic Hose Assembly

      SKU: HT-08-ASB
      HT-08-ASB | 1/2" HYDRAULAX TOUGH™ Hydraulic Hose Assembly HT-08-ASB

      Not looking for a custom made hose assembly? This product is also sold by the foot, and by complete reels.

      Pressure Rating: 5,000 psi

      Cost Per Foot:$4.56

      Assembly Fee: $10.50

      Choose Your Options

      Hose Fittings

      + $0.00

      Attention – it is not recommended to use these angled fittings together. We highly recommend using a Straight Fitting on one end, with an adapter to make the desired installation, and the angled fitting on the other end. This is to make installation of the hose easier.

      Orientation

      Please select how these fittings should be orientated to each other

      Please select how these fittings should be orientated to each other.

      Select Orientation

      Overall Length (includes fittings)

      + $0.00

      Value must be between 6 – 2160

      Hose Assembly Length Information

      Hose Assembly Length Information

      Would you like hose protection?

      + $0.00

      Installation Fee: $1/foot

      Hose Protection Information

      Hose Protection Information

      Would you like a hose label attached?

      + $0.00

      Please select a Hose Label option.

      Hose Label

      Hose Label

      Reference / Hose Name Text (Optional):
      If blank, our standard label will be attached.
      Limited to 30 characters.

      + $0.00

      I only want one end of the hose crimped, the other end will be open.

      + $0.00

      Please Confirm:

      Whoops

      You are trying to purchase a hose assembly without any fittings...are you just looking for bulk hose? if so, click here to order.

      X

      DIY Hose Protection Options

      Would you like to add a Hose Protection separately?





      Whoops

      You must enter a length in the Inches field.

      Are you sure you only want one fitting crimped on?



      Length Converter

      Type a value in the Feet field to convert the value to Inches:

      Inches:

      Total:$10.50



      Hydraulax Tough™ is the ideal hose for high abrasion environments. In addition to its recognized benefits of excellent resistance to ozone, UV radiation, high temperatures and salt water, it meets the special requirements of the underground coal mining industry. Recommended for hydraulic service with petroleum and water-base fluids, or general industrial service.

      MSHA approved

      Interchanges with Kurt TUFF


      Use this product with the following hose fittings:

      Braided Hose Fittings

      Standard crimp
      Interchanges with
      Weatherhead U Series


      W Series Hose Fittings

      Bite-to-the-wire peformance

      43 Series Hose Fittings

      Parker-Compatible 43 Series Fittings
      Questions & Answers
      avatar
      Popular Questions

      9 months ago
      9 months ago
      A number 8 hydraulic hose has an internal diameter of 1/2 inch. The "number 8" designation typically refers to the dash size, which is a standard measure in the hydraulic industry where each dash size.
      0 | 0
      9 months ago
      9 months ago
      To identify hydraulic fitting size, measure the outer diameter of the male threads or the inner diameter of the female threads using calipers. Then, refer to a thread identification chart to match the measurements with the correct fitting size and thread type.
      0 | 0
      9 months ago
      9 months ago
      Hydraulic hose is typically measured by its Inner Diameter (ID). This measurement is important because it determines the flow velocity of the hydraulic fluid within the hose. Source: 1. "Hydraulic Hose 101: Fast Facts" - https://www.parker.com/literature/Hos.... (See under "Hose Size Selection Nomograph" section) 2. "Hydraulic hose sizing" - https://www.pirtekusa.com/technical-i... (See under "Hose Bore size" section).
      0 | 0
      9 months ago
      9 months ago
      The Joint Industrial Council (JIC) introduced JIC fittings. They were originally designed and implemented by the U.S. Army during World War II, for quick and reliable field assembly, disassembly, and repair of military equipment. Referenced URLs: 1. https://www.air-way.com/jic-fittings-... The information can be found in the first two paragraphs under the heading "What are JIC fittings?" 2. https://www.hoseassemblytips.com/what... The information is in the first paragraph under the heading "What is a JIC fitting?"
      0 | 0
      9 months ago
      9 months ago
      The ID of a hydraulic hose refers to its "inside diameter." It is a critical measurement that indicates the size of the pipe. This measurement directly correlates to the rate of fluid flow within the hose, the pressure it can withstand, and its fitting compatibility. Reference: 1. "Hydraulic Hose 101: Fast Facts" (https://www.hoseassemblytips.com/hydr...). You can see this information in the section titled "Size." 2. "How to Identify Fluid Ports and Connectors" (https://www.hydraulicsdirect.com/Flui...). The information can be found in the paragraph under the subheading "How to Measure Threads."
      0 | 0
      9 months ago
      9 months ago
      The ID of a hydraulic hose refers to its "inside diameter." It is a critical measurement that indicates the size of the pipe. This measurement directly correlates to the rate of fluid flow within the hose, the pressure it can withstand, and its fitting compatibility. Reference: 1. "Hydraulic Hose 101: Fast Facts" (https://www.hoseassemblytips.com/hydr...). You can see this information in the section titled "Size." 2. "How to Identify Fluid Ports and Connectors" (https://www.hydraulicsdirect.com/Flui...). The information can be found in the paragraph under the subheading "How to Measure Threads."
      0 | 0
      9 months ago
      9 months ago
      The ID of a hydraulic hose refers to its "inside diameter." It is a critical measurement that indicates the size of the pipe. This measurement directly correlates to the rate of fluid flow within the hose, the pressure it can withstand, and its fitting compatibility. Reference: 1. "Hydraulic Hose 101: Fast Facts" (https://www.hoseassemblytips.com/hydr...). You can see this information in the section titled "Size." 2. "How to Identify Fluid Ports and Connectors" (https://www.hydraulicsdirect.com/Flui...). The information can be found in the paragraph under the subheading "How to Measure Threads."
      0 | 0
      8 months ago
      8 months ago
      The numbers on hydraulic hoses typically indicate the hose's diameter, pressure rating, and compliance with specific industry standards. For example, a number like "1/2-12" might denote a 1/2-inch diameter hose with a 12,000 PSI pressure rating. These markings help ensure the hose is suitable for its intended application.
      0 | 0
      View all

      Shopper Approved Q&A Shopper Approved Q&A Answerbase
      view



      United StatesClose
      Flag of United States
      Powered by
      duty and tax information for United States