My Cart: 0 item(s)
Thumbnail Filmstrip of MJ-08-10 | 1/2" Hose x 5/8" JIC Male Images
A MJ-08-10 | 1/2" hose x 5/8" JIC male fitting is a type of hydraulic fitting that consists of two parts: a hose fitting with a 1/2" inside diameter and a JIC male fitting with a 5/8" tube size and a nominal thread size of 7/8"-14. The JIC male fitting has a 37-degree flare that mates with a JIC female fitting, providing a reliable seal in high-pressure hydraulic applications.
Questions & Answers
Popular Questions
The numbers on hydraulic fittings refer to the size and type of the fittings. They can indicate the fitting's thread size, pitch, and compatibility with other components. This information was sourced from "Hydraulic Hose Fittings Guide: How to Find the Right One" on the Hydraulics Direct website (https://www.hydraulicsdirect.com/Unde...), specifically under the sections "Understanding the Numbers" and "Choosing the Right Fitting".
The standard for hydraulic fittings is typically governed by organizations such as the International Organization for Standardization (ISO) and the Society of Automotive Engineers (SAE). Common standards include ISO 8434 for metallic tube connections and SAE J516 for hydraulic hose fittings, which ensure compatibility, reliability, and safety in hydraulic systems.
To determine the size of the hydraulic hose you need, you need to consider the inside diameter, the outside diameter, and the length of the hose. The inside diameter is related to the flow velocity and the amount of fluid that needs to be transported, while the outside diameter and length are often determined by the space constraints of your machine or application. Source: 1. "Hose Basics" from Parker Hannifin Corporation (https://www.parker.com/literature/Hos...). Information can be found throughout the document, but mainly in the section "Hose Size Selection" on page 8. 2. "How to Identify Fluid Ports and Connectors" from Discount Hydraulic Hose (https://www.discounthydraulichose.com...). The information can be found under the section "Measuring… See full answer »
The 100R1 hose refers to a type of hydraulic hose defined by the SAE (Society of Automotive Engineers) 100R1 specification. It is a high-pressure, single steel wire braided hose that is suitable for use with crude oils, fuel oils, lubricating oils, and antifreeze solutions. References: 1. Information sourced from https://www.hoseandfittings.com/what-... - under the section "What is SAE 100R1 Hose?" 2. Additional information from https://www.parker.com/literature/Hos... - see page 17 under the section "SAE 100R1 TYPE AT".
To determine the size of a hydraulic fitting, you can measure the outside diameter (OD) of the fitting threads using calipers and then compare the measurement to a thread identification chart. Additionally, you can identify the fitting type and thread pitch to ensure compatibility with your system.
Hydraulic hose is typically measured by its Inner Diameter (ID). This measurement is important because it determines the flow velocity of the hydraulic fluid within the hose. Source: 1. "Hydraulic Hose 101: Fast Facts" - https://www.parker.com/literature/Hos.... (See under "Hose Size Selection Nomograph" section) 2. "Hydraulic hose sizing" - https://www.pirtekusa.com/technical-i... (See under "Hose Bore size" section).
