My Cart: 0 item(s)
Thumbnail Filmstrip of R1-08-REEL | 1/2" SAE 100R1AT Hydraulic Hose (350 feet) Images
Reels may not be continuous
R1 hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.
Not suitable for hydraulic fluids on phosphate ester basis (HFD).
Use this hose with:
| Use this product with the following hose fittings: | |||
 Braided Hose Fittings Standard crimp Interchanges with Weatherhead U Series |
 W Series Hose Fittings Bite-to-the-wire peformance |
 43 Series Hose Fittings Parker-Compatible 43 Series Fittings |
 Field-Attachable Hose Fittings SAE 100R1AT hose only |
| Product Number |
Inside Diameter |
Outside Diameter |
Maximum Working Pressure |
Minimum Burst Pressure |
Minimum Bend Radius |
|---|---|---|---|---|---|
| R1-04 | 1/4" | 0.53" | 2,750 PSI | 11,000PSI | 4" |
| R1-06 | 3/8" | 0.69" | 2,250 PSI | 9,000 PSI | 5" |
| R1-08 | 1/2" | 0.82" | 2,000 PSI | 8,000 PSI | 7" |
| R1-10 | 5/8" | 0.94" | 1,500 PSI | 6,000 PSI | 8" |
| R1-12 | 3/4" | 1.10" | 1,250 PSI | 5,000 PSI | 9.5" |
| R1-16 | 1" | 1.41" | 1,000 PSI | 4,000 PSI | 12" |
| Hose Features | |
|---|---|
| Inner Tube Material | Oil-resistant Synthetic Rubber |
| Reinforcement | 1 braid of high tensile steel wire. |
| Cover Protection | Oil and Abrasion-Resistant synthetic rubber |
| Temperature Rating | -40°F to 212°F |
| Specialty | Compatible with Field Reusable Fittings |
Questions & Answers
Popular Questions
ISO 8434 and DIN 2353 are both standards for tube fittings used in hydraulic systems, but they originate from different standardization bodies. ISO 8434 is an international standard developed by the International Organization for Standardization (ISO), while DIN 2353 is a German national standard established by the Deutsches Institut für Normung (DIN). Despite their different origins, both standards are technically very similar and are often used interchangeably in industry.
A DIN fitting refers to a type of connector or coupling that adheres to the standards set by the Deutsches Institut für Normung (DIN), the German Institute for Standardization. These fittings are widely used in various industries, including plumbing, hydraulics, and pneumatics, to ensure compatibility and safety across equipment and systems.
In hydraulics, "DIN" stands for "Deutsches Institut für Normung," which is the German Institute for Standardization. DIN standards are widely used in hydraulic systems to ensure compatibility and quality of components, such as fittings, valves, and hoses, adhering to rigorous engineering specifications.
The DIN standard for compression fittings is primarily DIN 2353. This standard specifies dimensions, design, and performance requirements for compression fittings used in hydraulic systems to ensure compatibility and reliability across different manufacturers and applications.
Yes, the ISO equivalent of DIN 2353 is ISO 8434-1. Both standards pertain to compression fittings for hydraulic and pneumatic systems, ensuring compatibility and interchangeability of components across different regions and manufacturers.
DIN 2353 is a German standard that specifies the requirements for tube fittings used in hydraulic and pneumatic systems. These fittings are designed to ensure leak-free connections in high-pressure applications and are widely used in various industries for their reliability and durability. The standard covers different series of fittings based on pressure ratings and sizes.
We only offer crimpable fittings for 1/4'' id hose.
FDINLX-04-14 strt
FDINLX45-04-14 45 deg.
FDINLX90-04-14 90 dep.
FDINLX-04-14 strt
FDINLX45-04-14 45 deg.
FDINLX90-04-14 90 dep.
