DiscountHydraulicHose

0

DiscountHydraulicHose

Shop Categories

Secure Checkout
R1-10-ASB | 5/8" SAE 100R1AT Hydraulic Hose Assembly graphics/00000001/R1-04-1.jpg
    R1-10-ASB | 5/8" SAE 100R1AT Hydraulic Hose Assembly
    Purchase R1-10-ASB | 5/8" SAE 100R1AT Hydraulic Hose Assembly

    SKU: R1-10-ASB
    R1-10-ASB | 5/8" SAE 100R1AT Hydraulic Hose Assembly R1-10-ASB

    Not looking for a custom made hose assembly? This product is also sold by the foot, and by complete reels.

     Pressure Rating: 1,500 psi

    Cost Per Foot:$1.56

    Assembly Fee: $10.50

    Choose Your Options

    Hose Fittings

    + $0.00

    Attention – it is not recommended to use these angled fittings together. We highly recommend using a Straight Fitting on one end, with an adapter to make the desired installation, and the angled fitting on the other end. This is to make installation of the hose easier.

    Orientation

    Please select how these fittings should be orientated to each other
    ₓ

    Please select how these fittings should be orientated to each other.

    Select Orientation

    Overall Length (includes fittings)

    + $0.00

    Value must be between 6 – 3900
    Try our conversion chart
    ₓ

    Hose Assembly Length Information

    Hose Assembly Length Information

    Would you like hose protection?

    + $0.00

    Installation Fee: $1/foot

    ₓ

    Hose Protection Information

    Hose Protection Information

    Would you like a hose label attached?

    + $0.00

    Please select a Hose Label option.

    ₓ

    Hose Label

    Hose Label

    Reference / Hose Name Text (Optional):
    If blank, our standard label will be attached.
    Limited to 30 characters.

    + $0.00

    I only want one end of the hose crimped, the other end will be open.

    + $0.00

    Please Confirm:

    ⚠

    Whoops

    You are trying to purchase a hose assembly without any fittings...are you just looking for bulk hose? if so, click here to order.

    Cancel
    Redirect...
    X

    DIY Hose Protection Options

    Would you like to add a Hose Protection separately?




    No, Thanks
    ⚠

    Whoops

    You must enter a length in the Inches field.

    Cancel

    Are you sure you only want one fitting crimped on?

    No
    Yes



    ₓ

    Length Converter

    Type a value in the Feet field to convert the value to Inches:

    Inches:

    Total:$10.50


    R1 hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air. Also generally suitable for biologically degradable hydraulic liquids (HETG, HEPG, HEES) however limited by fluid additives.

    Not suitable for hydraulic fluids on phosphate ester basis (HFD).

    Use this hose with:

    Use this product with the following hose fittings:

    Braided Hose Fittings
    Standard crimp
    Interchanges with
    Weatherhead U Series
    W Series Hose Fittings
    Bite-to-the-wire peformance
    43 Series Hose Fittings
    Parker-Compatible 43 Series Fittings
    Field-Attachable Hose Fittings
    SAE 100R1AT hose only