W stands for bite to the wire. See full answer »

100R16 Compact Flexible high pressure hose, 100R17 3000 PSI Constant pressure Hose. See full answer »

Yes, the length of a hose can affect hydraulic pressure. As the length of the hose increases, there is more resistance to the flow of the fluid, which can result in a pressure drop. However, the overall impact depends on factors like the hose diameter, fluid viscosity, and flow rate. See full answer »

The numbers on a hydraulic hose indicate the size of the hose. They usually refer to the inside diameter, outside diameter and the pressure rating of the hose. You can find this information on the website of discounthydraulichose the section "Hydraulic Hose", See full answer »

Hydraulic hose is typically measured by its Inner Diameter (ID). This measurement is important because it determines the flow velocity of the hydraulic fluid within the hose. Source: 1. "Hydraulic Hose 101: Fast Facts" - https://www.parker.com/literature/Hos.... (See under "Hose Size Selection Nomograph" section) 2. "Hydraulic hose sizing" - https://www.pirtekusa.com/technical-i... (See under "Hose Bore size" section). See full answer »

SAE 100R17 is a specification for hydraulic hose, set by the Society of Automotive Engineers (SAE), that requires a higher pressure resistance than standard hoses. It is designed to withstand a maximum of 3,000-3,100 psi, depending on the hose diameter, and is commonly used in heavy-duty equipment and hydraulic machines. This information is found on the website "Hose and Fittings, Etc" under the section "SAE 100R17 Hydraulic Hose". (https://www.hoseandfittingsetc.com/ou...) It is also found on the website "Hose Products Division" under the section "SAE 100R17 Compact – 21 MPa Maximum Working Pressure". (https://web.archive.org/web/201504021...) See full answer »

The primary difference between 100R2 and 100R17 lies in their construction and applications. SAE 100R2 is a two-wire braid hydraulic hose designed for higher pressure applications, while SAE 100R17 is a one-wire braid for sizes -04,06 and a two wire braid for sizes for all others hydraulic hose with a more flexible design and a tighter bend radius, making it suitable for medium pressure applications where space is limited. See full answer »

The flow rate of a 1/2 inch hose depends on several factors including the hydraulic pressure and the hose length. Under typical hose can deliver approximately 9-10 gallons per minute (GPM). However, actual flow rates may vary based on specific conditions and restrictions. See full answer »

To correctly install a hydraulic hose assembly, first ensure the hose is of the proper type and length for the application, and check for cleanliness to prevent contamination. Connect the hose ends to the fittings, ensuring a secure and leak-free connection, and avoid twisting or bending the hose beyond its specified limits to prevent damage. See full answer »

To determine the size of a hydraulic hose, measure the inside diameter (ID) of the hose using a caliper or a specialized hose ID gauge. Additionally, check for any markings on the hose itself, as manufacturers often print the size and specifications directly on the hose surface. See full answer »