My Cart: 0 item(s)
Thumbnail Filmstrip of R2-06-REEL | 3/8" SAE 100R2AT Hydraulic Hose (400 feet) Images
Reels may not be continuous
R2-06-Reel is SAE100R2 hose with an inside diameter of 3/8 inch. Purchase a full reel of hose here to ensure you have all the hose you may need for any project.
SAE100R2AT hose is a high-pressure hydraulic hose commonly used in industrial and commercial applications. With its two braided steel wire reinforcement and synthetic rubber inner tube. SAE100R2AT hose is suitable for use with petroleum and water-based hydraulic fluids and is compatible with most hydraulic fittings.
Interchanges with Aeroquip FC212-06, Gates 6G2, Parker 301-6, and Weatherhead H42506
| Use this product with the following hose fittings: | |||
 Braided Hose Fittings Standard crimp Interchanges with Weatherhead U Series |  W Series Hose Fittings Bite-to-the-wire peformance |  43 Series Hose Fittings Parker-Compatible 43 Series Fittings |  Field-Attachable Hose Fittings SAE 100R2AT hose only |
| Product Number |
Inside Diameter |
Outside Diameter |
Maximum Working Pressure |
Minimum Burst Pressure |
Minimum Bend Radius |
|---|---|---|---|---|---|
| R2-04 | 1/4" | 0.59" | 5,800 psi | 23,200 psi | 4" |
| R2-06 | 3/8" | 0.75" | 4,785 psi | 19,140 psi | 5" |
| R2-08 | 1/2" | 0.88" | 4,000 psi | 16,000 psi | 7" |
| R2-10 | 5/8" | 0.98" | 3,625 psi | 14,500 psi | 8" |
| R2-12 | 3/4" | 1.16" | 3,120 psi | 12,480 psi | 9.5" |
| R2-16 | 1" | 1.50" | 2,395 psi | 9,580 psi | 12" |
| R2-20 | 1-1/4" | 1.87" | 1,815 psi | 7,260 psi | 16.5" |
| R2-24 | 1-1/2" | 2.17" | 1,305 psi | 5,220 psi | 20" |
| R2-32 | 2" | 2.66" | 1,160 psi | 4,640 psi | 25" |
| Hose Features | |
|---|---|
| Inner Tube Material | Oil-resistant Synthetic Rubber |
| Reinforcement | 2-Wire braid of high tensile steel wire. |
| Cover Protection | Oil and Abrasion-Resistant synthetic rubber |
| Temperature Rating | -40°F to 212°F |
| Specialty | Compatible with Field Reusable Fittings |
Questions & Answers
Popular Questions
Swivel fittings are designed to allow rotation while maintaining a seal, but they can leak if not properly installed or if they become worn or damaged over time. Regular maintenance and inspection can help prevent leaks by ensuring that seals and connections remain intact. Using high-quality fittings and ensuring correct installation can also reduce the likelihood of leaks.
Swivel fittings are connectors that allow for rotation between joined components, commonly used in plumbing, hydraulics, and pneumatic systems to prevent hose twisting and kinking. Different types include elbow swivels, which allow for angular adjustment; straight swivels, which provide axial rotation; and bulkhead swivels, which facilitate rotation through a fixed panel. These fittings come in various materials, such as brass, stainless steel, and plastic, to suit different applications and environments.
NPSM stands for National Pipe Straight Mechanical, which refers to a type of pipe thread used in mechanical applications. Unlike tapered threads, NPSM threads are straight and do not provide a seal on their own; they are typically used in situations where a seal is achieved through other means, such as an O-ring or gasket. These threads are standardized by ANSI/ASME B1.20.1 and are commonly used for mechanical connections where pressure-tight sealing is not required.
Swivel connectors work by allowing two connected components to rotate around a central axis, providing flexibility and preventing twisting or tangling of cables, hoses, or other linked parts. They typically consist of two main parts: a stationary component and a rotating component, connected through a bearing or similar mechanism that facilitates smooth rotation. This design helps maintain the integrity and functionality of the connected components while accommodating movement and orientation changes.
NPSM (National Pipe Straight Mechanical) threads are straight threads, while NPT (National Pipe Tapered) threads are tapered. Due to these differences, they are not directly compatible and cannot be threaded together without risking leaks or damage. If a connection between NPSM and NPT is necessary, an adapter or a sealing method such as a gasket or O-ring should be used to ensure a proper seal.
The NPSM (National Pipe Straight Mechanical) thread is a straight pipe thread used in mechanical and low-pressure applications. It follows the ANSI/ASME B1.20.1 standard and features a straight thread profile with a 60-degree thread angle. Unlike tapered threads, NPSM threads do not provide a seal on their own and typically require a sealing mechanism, such as an O-ring or gasket, to ensure leak-proof connections.
A 3/4 NPT fitting refers to a plumbing or piping component with a National Pipe Taper (NPT) thread size of 3/4 inch. NPT is a standardized thread type used primarily in the United States for creating a tight, leak-proof seal in pipes and fittings. The 3/4 inch size indicates the nominal diameter of the pipe that the fitting is designed to connect with.
An NPT adapter is a type of fitting used to connect pipes or hoses with National Pipe Tapered (NPT) threads, which are commonly used in plumbing and industrial applications in the United States. NPT adapters ensure a tight, leak-resistant seal by utilizing a tapered thread design that becomes tighter as the joint is screwed together. These adapters are typically made from materials like brass, stainless steel, or plastic, and are used to join pipes of different sizes or types while maintaining the integrity of the connection.
The "3/4 NPT" refers to a National Pipe Thread with a nominal diameter of 3/4 inch. NPT is a U.S. standard for tapered threads used on pipes and fittings, ensuring a tight seal due to the tapering. The thread data typically includes dimensions like the thread pitch, thread angle, and taper rate, which are essential for ensuring compatibility and proper sealing in piping systems.
A 3/4 NPSM refers to a National Pipe Straight Mechanical (NPSM) thread size. This is a type of straight thread used in mechanical joints where a seal is achieved with a gasket or O-ring rather than the threads themselves. The nominal size of 3/4 inch indicates the approximate inside diameter of the pipe, while the thread pitch and dimensions conform to specific standards for NPSM threads.
