My Cart: 0 item(s)
Thumbnail Filmstrip of R2-08-REEL | 1/2" SAE 100R2AT Hydraulic Hose (320 feet) Images
Reels may not be continuous
R2-08 is SAE100R2 hose with an inside diameter of 1/2 an inch.
Purchase on this page by the foot by entering the amount of feet you need in
the qty box and we will send one continuous piece of hose at that desired
length.
SAE100R2AT hose is a high-pressure hydraulic hose commonly
used in industrial and commercial applications. With its two braided steel wire
reinforcement and synthetic rubber inner tube. SAE100R2AT hose is suitable for
use with petroleum and water-based hydraulic fluids and is compatible with most
hydraulic fittings.
Interchanges with Aeroquip FC212-08, Gates 8G2, Parker 301-8, and Weatherhead H42508.
| Use this product with the following hose fittings: | |||
 Braided Hose Fittings Standard crimp Interchanges with Weatherhead U Series |  W Series Hose Fittings Bite-to-the-wire peformance |  43 Series Hose Fittings Parker-Compatible 43 Series Fittings |  Field-Attachable Hose Fittings SAE 100R2AT hose only |
| Product Number |
Inside Diameter |
Outside Diameter |
Maximum Working Pressure |
Minimum Burst Pressure |
Minimum Bend Radius |
|---|---|---|---|---|---|
| R2-04 | 1/4" | 0.59" | 5,800 psi | 23,200 psi | 4" |
| R2-06 | 3/8" | 0.75" | 4,785 psi | 19,140 psi | 5" |
| R2-08 | 1/2" | 0.88" | 4,000 psi | 16,000 psi | 7" |
| R2-10 | 5/8" | 0.98" | 3,625 psi | 14,500 psi | 8" |
| R2-12 | 3/4" | 1.16" | 3,120 psi | 12,480 psi | 9.5" |
| R2-16 | 1" | 1.50" | 2,395 psi | 9,580 psi | 12" |
| R2-20 | 1-1/4" | 1.87" | 1,815 psi | 7,260 psi | 16.5" |
| R2-24 | 1-1/2" | 2.17" | 1,305 psi | 5,220 psi | 20" |
| R2-32 | 2" | 2.66" | 1,160 psi | 4,640 psi | 25" |
| Hose Features | |
|---|---|
| Inner Tube Material | Oil-resistant Synthetic Rubber |
| Reinforcement | 2-Wire braid of high tensile steel wire. |
| Cover Protection | Oil and Abrasion-Resistant synthetic rubber |
| Temperature Rating | -40°F to 212°F |
| Specialty | Compatible with Field Reusable Fittings |
Questions & Answers
Popular Questions
The numbers on hydraulic fittings refer to the size and type of the fittings. They can indicate the fitting's thread size, pitch, and compatibility with other components. This information was sourced from "Hydraulic Hose Fittings Guide: How to Find the Right One" on the Hydraulics Direct website (https://www.hydraulicsdirect.com/Unde...), specifically under the sections "Understanding the Numbers" and "Choosing the Right Fitting".
The three types of hydraulic fittings are JIC (Joint Industry Council) fittings, ORFS (O-Ring Face Seal) fittings, and NPT (National Pipe Tapered) fittings. JIC fittings are most commonly used in the Fluid Power industry, ORFS fittings provide the best leak protection, and NPT fittings are commonly used in low-pressure hydraulic systems. This information was sourced from "Hydraulic Fittings Selection Guide" on Engineering360 (https://www.globalspec.com/learnmore/...) under the sections "Types of Hydraulic Fittings" and "Specifications".
To size a hydraulic hose fitting, measure the inside diameter (ID) of the hose to ensure compatibility with the fitting, and verify the fitting's thread type and size using a thread gauge or identification tool. Additionally, consider the hose's pressure rating and application to select a fitting that meets or exceeds the system requirements.
To determine the correct size hydraulic fitting, measure the outer diameter (OD) of the fitting's threads and the pitch (distance between threads) using calipers and a thread pitch gauge. Consult a sizing chart or the manufacturer's specifications to match these measurements to the appropriate fitting size.
Hydraulic fittings are components used to connect hoses, pipes, and tubes in a hydraulic system, ensuring a secure and leak-free flow of hydraulic fluid. They come in various types, such as threaded, crimped, and flanged, and are made from materials like steel, brass, or stainless steel to withstand high pressures and corrosive environments. Proper selection and installation of hydraulic fittings are crucial for maintaining system integrity and performance.
To identify types of hydraulic fittings, you can look at the thread type (such as NPT, BSP, or metric), the sealing method (like O-ring, metal-to-metal, or tapered), and the fitting shape (such as elbow, tee, or straight). Additionally, checking the manufacturer's specifications and using a thread gauge can help ensure accurate identification.
Hydraulic fittings are components used to connect hoses, pipes, and tubes in a hydraulic system, ensuring a secure and leak-free connection. They work by using various sealing mechanisms, such as O-rings or metal-to-metal contact, to withstand high pressure and facilitate the flow of hydraulic fluid. Proper selection and installation of these fittings are crucial for maintaining system integrity and performance.
