My Cart: 0 item(s)
Thumbnail Filmstrip of R2-08 | 1/2" SAE 100R2AT Hydraulic Hose (by the foot) Images
R2-08 is SAE100R2 hose with an inside diameter of 1/2 an inch. Purchase on this page by the foot by entering the amount of feet you need in the qty box and we will send one continuous piece of hose at that desired length.
SAE100R2AT hose is a high-pressure hydraulic hose commonly used in industrial and commercial applications. With its two braided steel wire reinforcement and synthetic rubber inner tube. SAE100R2AT hose is suitable for use with petroleum and water-based hydraulic fluids and is compatible with most hydraulic fittings.
Interchanges with Aeroquip FC212-08, Gates 8G2, Parker 301-8, and Weatherhead H42508.
| Use this product with the following hose fittings: | |||
 Braided Hose Fittings Standard crimp Interchanges with Weatherhead U Series |  W Series Hose Fittings Bite-to-the-wire peformance |  43 Series Hose Fittings Parker-Compatible 43 Series Fittings |  Field-Attachable Hose Fittings SAE 100R2AT hose only |
| Product Number |
Inside Diameter |
Outside Diameter |
Maximum Working Pressure |
Minimum Burst Pressure |
Minimum Bend Radius |
|---|---|---|---|---|---|
| R2-04 | 1/4" | 0.59" | 5,800 psi | 23,200 psi | 4" |
| R2-06 | 3/8" | 0.75" | 4,785 psi | 19,140 psi | 5" |
| R2-08 | 1/2" | 0.88" | 4,000 psi | 16,000 psi | 7" |
| R2-10 | 5/8" | 0.98" | 3,625 psi | 14,500 psi | 8" |
| R2-12 | 3/4" | 1.16" | 3,120 psi | 12,480 psi | 9.5" |
| R2-16 | 1" | 1.50" | 2,395 psi | 9,580 psi | 12" |
| R2-20 | 1-1/4" | 1.87" | 1,815 psi | 7,260 psi | 16.5" |
| R2-24 | 1-1/2" | 2.17" | 1,305 psi | 5,220 psi | 20" |
| R2-32 | 2" | 2.66" | 1,160 psi | 4,640 psi | 25" |
| Hose Features | |
|---|---|
| Inner Tube Material | Oil-resistant Synthetic Rubber |
| Reinforcement | 2-Wire braid of high tensile steel wire. |
| Cover Protection | Oil and Abrasion-Resistant synthetic rubber |
| Temperature Rating | -40°F to 212°F |
| Specialty | Compatible with Field Reusable Fittings |
Questions & Answers
Popular Questions
To pressure test a hydraulic hose, connect it securely to a hydraulic pressure testing machine, ensuring all fittings and connections are tight. Gradually increase the pressure to the hose's rated maximum pressure, monitoring for any leaks or deformations, and maintain this pressure for a specified period to confirm its integrity.
To perform a hydraulic pressure test, fill the system with a non-compressible fluid, usually water, and pressurize it using a hand pump, motorized pump, or other pressure source to the required test pressure. Monitor the system for a specified period, checking for pressure drops or leaks that indicate potential issues.
The principle of a hydraulic pressure testing machine involves using a liquid, typically oil or water, to apply pressure to a component or system to test its strength, integrity, and leak resistance. By increasing the hydraulic pressure within the system, the machine can simulate operational conditions and identify potential points of failure or weaknesses in the material or assembly.
The proof pressure test for hoses is a procedure used to ensure the integrity and reliability of a hose by subjecting it to a pressure higher than its maximum operating pressure, typically 1.5 to 2 times higher. This test verifies that the hose can withstand extreme conditions without leaking, deforming, or failing.
