My Cart: 0 item(s)
Thumbnail Filmstrip of R2-08 | 1/2" SAE 100R2AT Hydraulic Hose (by the foot) Images
R2-08 is SAE100R2 hose with an inside diameter of 1/2 an inch. Purchase on this page by the foot by entering the amount of feet you need in the qty box and we will send one continuous piece of hose at that desired length.
SAE100R2AT hose is a high-pressure hydraulic hose commonly used in industrial and commercial applications. With its two braided steel wire reinforcement and synthetic rubber inner tube. SAE100R2AT hose is suitable for use with petroleum and water-based hydraulic fluids and is compatible with most hydraulic fittings.
Interchanges with Aeroquip FC212-08, Gates 8G2, Parker 301-8, and Weatherhead H42508.
| Use this product with the following hose fittings: | |||
 Braided Hose Fittings Standard crimp Interchanges with Weatherhead U Series |  W Series Hose Fittings Bite-to-the-wire peformance |  43 Series Hose Fittings Parker-Compatible 43 Series Fittings |  Field-Attachable Hose Fittings SAE 100R2AT hose only |
| Product Number |
Inside Diameter |
Outside Diameter |
Maximum Working Pressure |
Minimum Burst Pressure |
Minimum Bend Radius |
|---|---|---|---|---|---|
| R2-04 | 1/4" | 0.59" | 5,800 psi | 23,200 psi | 4" |
| R2-06 | 3/8" | 0.75" | 4,785 psi | 19,140 psi | 5" |
| R2-08 | 1/2" | 0.88" | 4,000 psi | 16,000 psi | 7" |
| R2-10 | 5/8" | 0.98" | 3,625 psi | 14,500 psi | 8" |
| R2-12 | 3/4" | 1.16" | 3,120 psi | 12,480 psi | 9.5" |
| R2-16 | 1" | 1.50" | 2,395 psi | 9,580 psi | 12" |
| R2-20 | 1-1/4" | 1.87" | 1,815 psi | 7,260 psi | 16.5" |
| R2-24 | 1-1/2" | 2.17" | 1,305 psi | 5,220 psi | 20" |
| R2-32 | 2" | 2.66" | 1,160 psi | 4,640 psi | 25" |
| Hose Features | |
|---|---|
| Inner Tube Material | Oil-resistant Synthetic Rubber |
| Reinforcement | 2-Wire braid of high tensile steel wire. |
| Cover Protection | Oil and Abrasion-Resistant synthetic rubber |
| Temperature Rating | -40°F to 212°F |
| Specialty | Compatible with Field Reusable Fittings |
Questions & Answers
Popular Questions
A SAE 100R1 hose is a type of hydraulic hose that meets the standards set by the Society of Automotive Engineers (SAE) for single-wire braided hoses. It is designed to convey hydraulic fluids under pressure and is commonly used in industrial, agricultural, and construction machinery. The hose typically features an inner tube of oil-resistant synthetic rubber, a single steel wire braid reinforcement, and an outer cover of weather-resistant synthetic rubber.
A SAE 100 R1 hose is a type of hydraulic hose specified by the Society of Automotive Engineers (SAE) standard 100R1. It consists of a single layer of steel wire braid reinforcement and is designed to handle high-pressure hydraulic applications with a specific temperature range and pressure rating.
The numbers on hydraulic hoses typically indicate the hose's diameter, pressure rating, and compliance with specific industry standards. For example, a number like "1/2-12" might denote a 1/2-inch diameter hose with a 12,000 PSI pressure rating. These markings help ensure the hose is suitable for its intended application.
R1 hydraulic hose, also known as SAE 100R1, is a type of high-pressure hose used in hydraulic systems to transmit fluid power. It typically consists of a single layer of steel wire braid reinforcement, which provides strength and flexibility, and is designed to handle medium-pressure applications.
To calculate the appropriate hydraulic hose size, you need to determine the required inner diameter based on the flow rate and acceptable pressure drop. Utilize the formula or reference charts provided by hose manufacturers that correlate flow rate (in gallons per minute or liters per minute) with hose size to ensure optimal performance and efficiency.
