My Cart: 0 item(s)
Thumbnail Filmstrip of R2-10 | 5/8" SAE 100R2AT Hydraulic Hose (by the foot) Images
R2-10 is SAE100R2 hose with an inside diameter of 5/8 inch.
Purchase on this page by the foot by entering the amount of feet you need in
the qty box and we will send one continuous piece of hose at that desired
length.
Maximum working pressure: 3,625 psi
Interchanges with Aeroquip FC212-10, Gates 10G2, Parker 301-10, and Weatherhead H42510
Interchanges with Aeroquip FC212-10, Gates 10G2, Parker 301-10, and Weatherhead H42510
| Use this product with the following hose fittings: | |||
 Braided Hose Fittings Standard crimp Interchanges with Weatherhead U Series |  W Series Hose Fittings Bite-to-the-wire peformance |  43 Series Hose Fittings Parker-Compatible 43 Series Fittings |  Field-Attachable Hose Fittings SAE 100R2AT hose only |
| Product Number |
Inside Diameter |
Outside Diameter |
Maximum Working Pressure |
Minimum Burst Pressure |
Minimum Bend Radius |
|---|---|---|---|---|---|
| R2-04 | 1/4" | 0.59" | 5,800 psi | 23,200 psi | 4" |
| R2-06 | 3/8" | 0.75" | 4,785 psi | 19,140 psi | 5" |
| R2-08 | 1/2" | 0.88" | 4,000 psi | 16,000 psi | 7" |
| R2-10 | 5/8" | 0.98" | 3,625 psi | 14,500 psi | 8" |
| R2-12 | 3/4" | 1.16" | 3,120 psi | 12,480 psi | 9.5" |
| R2-16 | 1" | 1.50" | 2,395 psi | 9,580 psi | 12" |
| R2-20 | 1-1/4" | 1.87" | 1,815 psi | 7,260 psi | 16.5" |
| R2-24 | 1-1/2" | 2.17" | 1,305 psi | 5,220 psi | 20" |
| R2-32 | 2" | 2.66" | 1,160 psi | 4,640 psi | 25" |
| Hose Features | |
|---|---|
| Inner Tube Material | Oil-resistant Synthetic Rubber |
| Reinforcement | 2-Wire braid of high tensile steel wire. |
| Cover Protection | Oil and Abrasion-Resistant synthetic rubber |
| Temperature Rating | -40°F to 212°F |
| Specialty | Compatible with Field Reusable Fittings |
Questions & Answers
Popular Questions
SAE 100R2AT is a specification for hydraulic hoses set by the Society of Automotive Engineers (SAE). It indicates a hose with two layers of braided steel wire reinforcement, suitable for high-pressure applications, and typically used in hydraulic systems. The "AT" denotes that the hose meets additional performance requirements for impulse testing.
