Yes, our hose crimpers are adjustable so you are able to crimp any brand hose and fittings as long as you have the crimp spec and the die needed. There is a micrometer that you adjust how far down it crimps to be able to accommodate different brands of hose and fittings. See full answer »

Crimping a hose refers to the process of using a machine or tool to deform a section of the hose, typically at the end, in order to attach a fitting or connector securely. This is often done in hydraulic systems to ensure a tight, leak-proof connection. Reference: 1. "Hose Crimping" on Brennan Inc.'s website (https://www.brennaninc.com/blog/what-...). The information is found in the first few paragraphs of the blog post. 2. "Hydraulic Hose Crimping" on the Hydraulics & Pneumatics website (https://www.hydraulicspneumatics.com/...). The information can be found in the first and second paragraphs of the article. See full answer »

Hose crimping involves putting the hose into the crimping machine, fitting the necessary die according to the hose's diameter, and then operating the machine to secure the fitting to the hose. This process is typically done using a hydraulic crimping machine. This information was sourced from "Hydraulics Direct" (https://www.hydraulicsdirect.com/Hydr...) specifically under the section "How to Crimp the Ends on a Hydraulic Hose" and "Hose & Fittings, Etc" (https://www.hoseandfittingsetc.com/ou...) under the section "Hydraulic Hose Assembly". See full answer »

A hose crimper works by applying concentrated force through a set of dies to cause the metal fitting to crimp or deform around the hose, creating a tight seal. This process is typically controlled by a hydraulic system to ensure consistent and precise crimps. Sources: 1. https://www.hoseassemblytips.com/what... - This information is stated in the first and second paragraphs of the article. 2. https://www.hydralok.net/how-does-a-h... - The information about the hydraulic system controlling the process is found in the first paragraph under the subheading "What is a hydraulic hose crimper?" See full answer »

A crimper works by applying pressure to a connector and wire, forcing them to deform and hold together tightly. This is typically achieved by placing the connector and wire into the crimper's die and applying force, either manually or with a powered tool. Sources: 1. "Crimping Tools: How They Work and Applications", from Apex Tool Group (https://www.apexhandtools.com/brands/...). The information can be found in the first and second paragraphs. 2. "Crimping Process", from TE Connectivity (https://www.te.com/global-en/products...). The information is in the 'Crimping Process' section. See full answer »

A hydraulic hose crimper is the tool used for crimping a hydraulic hose. This specialized device compresses the fitting onto the hose, ensuring a secure and leak-proof connection essential for high-pressure hydraulic systems. See full answer »

No, Sorry we do not. See full answer »

Indeed, the hose machine known as the UA 4 service press is compatible with 4SP two-piece fittings. See full answer »

Indeed, the hose machine, which is the UA 4 service press, is well-suited for working with short 90° long bend fittings. This is due to its open, horizontally movable plunger that simplifies the pressing process. See full answer »

Indeed, the hose machine, UA 4 service press, is designed for global use, thanks to its 1-phase variant of the standard drive unit. See full answer »