NPT (National Pipe Thread) fittings use a tapered thread to create a seal and are commonly used in plumbing and piping applications. JIC (Joint Industry Council) fittings, on the other hand, utilize a 37-degree flare seating surface to create a metal-to-metal seal, making them suitable for high-pressure hydraulic systems. See full answer »

To identify if your hydraulic fittings are JIC (Joint Industry Council), check the fitting's flare angle; JIC fittings have a 37-degree flare. Additionally, JIC fittings are typically characterized by their straight threads and are often labeled with the SAE J514 standard. See full answer »

JIC stands for Joint Industry Council, which developed the standards for these fittings. JIC fittings are commonly used in hydraulic systems due to their high-pressure capabilities and reliable sealing, characterized by a 37-degree flare seating surface. See full answer »

To identify JIC fittings, first measure the outer diameter of the male thread or the inner diameter of the female thread using a caliper. Then, compare these measurements to a JIC thread size chart to determine the correct size, ensuring the fitting has a 37-degree flare angle, characteristic of JIC fittings. See full answer »

BSPT (British Standard Pipe Taper) is a type of pipe thread with a taper, primarily used in plumbing and hydraulic systems in the UK and other countries following British standards. JIC (Joint Industry Council) fittings, on the other hand, are a type of flare fitting with a 37-degree sealing surface, commonly used in high-pressure hydraulic applications in North America for creating a metal-to-metal seal. See full answer »

JIC stands for "Joint Industry Council," and it refers to a type of thread standard commonly used in hydraulic fittings. JIC threads have a 37-degree flare seating surface, which provides a metal-to-metal seal for high-pressure applications. This standard is widely used due to its reliability and compatibility with various hydraulic systems. See full answer »

JIC (Joint Industry Council) and SAE (Society of Automotive Engineers) fittings are similar but not identical. Both have a 37-degree flare, making them compatible in terms of sealing, but they differ in their design specifications and standards. While they can often be used interchangeably in certain applications, it is important to ensure compatibility with the specific pressure and application requirements. See full answer »

A female JIC (Joint Industry Council) fitting size is determined by the outer diameter of the tubing it is designed to connect, as well as the thread size. JIC fittings follow a standard sizing system where common sizes are often expressed in dash numbers, such as -4, -6, -8, etc., which correspond to specific tube outer diameters and thread sizes in inches. To determine the exact size, you would need to reference a JIC fitting size chart. See full answer »