My Cart: 0 item(s)
R2-08-ASB is SAE100R2 hose with an inside diameter of 1/2 an inch. Purchase a full custom hose assembly here. We cut crimp and ship directly to you with many different customization options to ensure we get you exactly what you need.
SAE100R2AT hose is a high-pressure hydraulic hose commonly used in industrial and commercial applications. With its two braided steel wire reinforcement and synthetic rubber inner tube. SAE100R2AT hose is suitable for use with petroleum and water-based hydraulic fluids and is compatible with most hydraulic fittings.
Interchanges with Aeroquip FC212-08, Gates 8G2, Parker 301-8, and Weatherhead H42508.
| Use this product with the following hose fittings: | |||
 Braided Hose Fittings Standard crimp Interchanges with Weatherhead U Series |  W Series Hose Fittings Bite-to-the-wire peformance |  43 Series Hose Fittings Parker-Compatible 43 Series Fittings |  Field-Attachable Hose Fittings SAE 100R2AT hose only |
Questions & Answers
Popular Questions
To identify JIC fittings, first measure the outer diameter of the male thread or the inner diameter of the female thread using a caliper. Then, compare these measurements to a JIC thread size chart to determine the correct size, ensuring the fitting has a 37-degree flare angle, characteristic of JIC fittings.
Hydraulic hose is typically measured by its Inner Diameter (ID). This measurement is important because it determines the flow velocity of the hydraulic fluid within the hose. Source: 1. "Hydraulic Hose 101: Fast Facts" - https://www.parker.com/literature/Hos.... (See under "Hose Size Selection Nomograph" section) 2. "Hydraulic hose sizing" - https://www.pirtekusa.com/technical-i... (See under "Hose Bore size" section).
The ID of a hydraulic hose refers to its "inside diameter." It is a critical measurement that indicates the size of the pipe. This measurement directly correlates to the rate of fluid flow within the hose, the pressure it can withstand, and its fitting compatibility. Reference: 1. "Hydraulic Hose 101: Fast Facts" (https://www.hoseassemblytips.com/hydr...). You can see this information in the section titled "Size." 2. "How to Identify Fluid Ports and Connectors" (https://www.hydraulicsdirect.com/Flui...). The information can be found in the paragraph under the subheading "How to Measure Threads."
To identify JIC (Joint Industry Council) hydraulic fittings, look for a 37-degree flare seating surface on the male fitting and a corresponding 37-degree flare on the female fitting. Additionally, JIC fittings typically follow SAE J514 standards, and you can verify the thread size and pitch using a thread gauge or caliper to ensure compatibility.
A 10 JIC hose refers to a hose with a fitting size of or 5/8 inches. JIC (Joint Industry Council) fittings are a type of flare fitting used in high pressure applications and are measured by their thread size. Source: https://www.hoseandfittingsetc.com/ou... You can find the information in the "JIC 37 Flare (SAE J514)" section of the thread chart. Source: https://wojnarowicz.com.pl/docs/Metod... You can find the information on page 16, under the "JIC 37° Flare (SAE J514)" section.
